1、 Technical parameters:

Product Overview: When the surrounding area of the product catches fire, it should be ensured that it does not cause the spread of combustion. This testing instrument simulates the early situation of fire in the surrounding environment of electronic and electrical products, evaluates the fire hazard using simulation technology, and determines the fire resistance level of plastics (HB level, V level, VMT level). The device has accuracy and automatic timing.

Scope of application: This testing equipment is suitable for accessories, parts, and components of electronic and electrical products and household appliances, such as insulation shells, switch panels, printed circuit boards, and insulation materials of household appliances.

Product features: The combustion chamber of this tester has a beautiful appearance and is resistant to smoke and gas corrosion. All key components are imported, with time digital display, three-dimensional adjustable fixtures, automated control system, independent ventilation, easy observation and recording, stable and reliable use. Equipped with a gas flow meter.

Compliant with GB/2408, GB13488, ISO1210, UL94 V-0 V-1 V-2, ASTM D635, D4804, 3801, IEC707 standards, this test mainly refers to UL94-2006 IEC60695-11-4、IEC60695-11-3、GB/T5169-2008ASTM D 5025 、ASTM D 5207、 GB2408/IEC60695-11-10/20、GB 31241、GB2408 The series and other standards use Bunsen burners of specified sizes and specific gas sources (methane or propane) to ignite the test sample in a horizontal or vertical state several times at a certain flame height and angle. The flammability and ignition hazard of the test sample are evaluated based on the duration and length of ignition and burning.

This experiment is mainly aimed at V-0 of UL-94 The flammability of materials such as V-1 and V-2 levels shall be graded and evaluated. Suitable for research, production, and quality inspection departments of electrical and electronic products and their component parts such as lighting equipment, low-voltage appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, electrical connectors, and accessories. It is also applicable to industries such as insulation materials, engineering plastics, or other solid combustible materials.

Test box volume: ≥ 0.5M3

Equipment dimensions: 1000mm wide x 650mm deep x 1300mm

Equipment dimensions: height 600mm x width 750mm x height 1000mm

Burner: It is a native lamp. Tube length 100mm, inner diameter 9.5mm

Metal mesh: It is a square with a side length of 125mm, and the mesh plate is made of steel wire with a diameter of 0.45 and a hole diameter of 0.7mm

Timer: 0~99.99 seconds can be set arbitrarily.

Combustion gas: coal gas

Horizontal combustion test:

Designed according to UL94 HB 7.1~7.7 and GB/T2408 FH-1FH-2, FH-3, and CSA C22.2 NO.0.17 standards

Combustion angle: 90 ° Flame height: 20mm

Vertical combustion test: designed according to UL94 V-0, V-1, V-2 and GB/T2408 FV-0, FV-1, FV-2 standards

Combustion angle: 90 ° Flame height: 20mm

Quality assurance

Our company's quality assurance system strictly follows the requirements of ISO9001:2000 standard;

From the date of acceptance, the equipment will be fully repaired free of charge by our company during the one-year quality assurance period (excluding damage caused by natural disasters, power abnormalities, improper human use, and improper maintenance). If the purchaser cannot work normally due to manufacturing quality problems of the test box while complying with the storage, use, and installation rules, the supplier will send maintenance personnel for free repair according to the service commitment time after receiving notification

According to the contract requirements, on-site training can be conducted when installing and debugging equipment for users and putting it into use;

Users can be arranged to come to the company for on-site technical training during equipment factory debugging, so that customers can understand equipment performance, train correct usage methods, operate and use, perform daily maintenance, common fault detection and elimination, reduce equipment failures caused by improper use, and save maintenance costs for customers;

After sales service commitment:

Method: 24/7 customer service hotline, dedicated service email address;

Requirement: Provide a clear response within 4 hours. If on-site service is required, it is required to be in place within 24 hours within the province, and outside the province, it is required to depart from Dongguan or the local office of the company within 24 hours to be responsible for the sales and after-sales service of the company's products in that area;

The maintenance time limit can be negotiated and formulated according to the specific situation and the requirements of the demander;

After the warranty period, if there are any problems with the equipment, the supplier promises to provide timely solutions and may charge maintenance and material fees at their discretion.

Regular follow-up visits: equipment inspection, troubleshooting, and dissemination of the latest industry information; Special reserve support for accessories and accessories;