Aerospace Inspection
- Hot Line：18322499311
-
Welcome to Tianjin Guoce Aerospace Technology Co., Ltd!
Inspection Industry Solution Provider
We are more professional.
- Service -
- Material testing
- Food Testing
- Chemical testing
- medical testing
- Vehicle Inspection
- Transit Inspection
- Electrical testing
- Communication detection
- Ship inspection
- Power testing
- Aerospace Inspection
- Weapon detection
- Building material testing
- Environmental testing
- Agricultural testing
- Biopharmaceutical testing
Related information
- What are the main inspection equipment for automobiles?
- What are the functions of a mold testing chamber?
- What gas is nitrogen in a deuterium tank?
- Common faults and solutions of ozone aging test chamber
- What are the functions of a salt spray testing machine?
- What equipment is required for a general laboratory?
- National Army Standard GJB150A Rain Test Knowledge?
- What is the wavelength range of visible light and ultraviolet light
Phone：18322499311
Mobile：18920407795
Email：10533646999@qq.com
Address：Xixiaozhuang Industrial Zone, Chagugang Town, Wuqing District, Tianjin City
Aerospace testing capability
Divided into environmental reliability testing and electromagnetic compatibility testing
< Environmental reliability testing
| Detection items | Detection standard |
| Static test | Strength and stiffness specifications for aerial missiles Ground tests GJB 540.10-1988 5.2 Strength and stiffness specifications for unmanned aerial vehicles Ground tests GJB5435.9-2005 3.4 |
| Vibration test | Military Equipment Laboratory Environmental Test Methods Part 16: Vibration Test GJB150.16A-2009 Procedure I, Procedure IV Military Equipment Environmental Test Methods Vibration Test GJB 150.16-1986 2.3 General Specification for Military Communication Equipment GJB 367A-2001 4.7.39 A05 Ship Electronic Equipment Environmental Test Vibration Test GJB 4.7-1983 4.2 Electrical and Electronic Products Environmental Test Part 2: Test Method Test Fc: Vibration (Sinusoidal) GB/T2423.10-2008 8 Coastal Defense Missile Environmental Specification Vibration Test for Onboard Equipment QJ 1184.12-1987 4 Coastal Defense Missile Environmental Test Standardize the road transportation test of missile equipment QJ 1184.13-1987 4 Environmental specification for coastal defense missiles Missile vibration test QJ 1185.4-1987 5 |
| Impact test | Military Equipment Laboratory Environmental Test Methods Part 18: Impact Test GJB 150.18A-2009 Procedures I, II, III, V Military Equipment Environmental Test Methods GJB 150.18-1986 Tests V, VI, VII General Specification for Military Communication Equipment GJB 367A-2001 4.7.39 A04 Environmental Test for Electrical and Electronic Products Part 2: Test Methods Test Ea and Guidelines: Impact GB/T 2423.5-1995 8 Coastal Defense Missile Environmental Specification Impact Test for Onboard Equipment QJ 1184.8-1987 4 Coastal Defense Missile Environmental Specification Onboard Equipment Shock Test QJ 1184.10-1987 4 Coastal Defense Missile Environmental Specification Missile Impact Test QJ 1185.3-1987 5 |
| Collision test | Environmental testing for ship electronic equipment - Shock test GJB 4.8-1983 4 Environmental testing for electrical and electronic products - Part 2: Test methods - Test Eb and guidelines: Collision GB/T 2423.6-1995 8 Environmental specifications for coastal defense missiles - Collision test for on-board equipment QJ 1184.9-1987 4 Environmental specifications for coastal defense missiles - Shock test for on-board equipment QJ 1184.10-1987 4 |
| High temperature test | Military Equipment Laboratory Environmental Test Methods Part 3: High Temperature Test GJB 150.3A-2009 7.2.1.1 7.2.1.2 7.2.2.1 7.2.2.2 Military Equipment Environmental Test Methods High Temperature Test GJB 150.3-1986 4.1 4.2 Ship Electronic Equipment Environmental Test High Temperature Test GJB 4.2-1983 4 Basic Environmental Test Procedures for Electrical and Electronic Products Test B: High Temperature Test Methods GB/T 2423.2-2008 5.2 5.3 5.4 Coastal Defense Missile Environmental Specification Missile Equipment High Temperature Test QJ 1184.1-1987 4.1 4.2 General Specification for Military Communication Equipment GJB367A-2001 4.7.28 |
| low temperature test | Military Equipment Laboratory Environmental Test Methods Part 4: Low Temperature Test GJB 150.4A-2009 7.2.1 7.2.2 7.2.3 Military Equipment Environmental Test Methods Low Temperature Test GJB 150.4-1986 4.1 4.2 Ship Electronic Equipment Environmental Test GJB 4.3-1983 4 Coastal Defense Missile Environmental Specification QJ 1184.2-1987 4.1 4.2 Basic Environmental Test Procedures for Electrical and Electronic Products Test A: Low Temperature Test Method GB/T 2423.1-2008 5.2 5.3 5.4 General Specification for Military Communication Equipment GJB367A-2001 4.7.27 |
| Rain test | Military Equipment Laboratory Environmental Test Methods Part 8: Rain Test GJB150.8A-2009 7.2.2 Procedure II Military Equipment Environmental Test Methods Rain Test GJB 150.8-1986 2.3 Anti Tank Missile Test Methods Part 11: Rain Test GJB 5895.11-2006 7.2 Rocket Launcher Test Methods Part 22: Rain Test GJB 6458.22-2008 3.4 Mine Explosive Equipment Environmental Test Methods Rain Test GJB 797.13-1990 2 Method 1 Terminal Guided Missile Test Methods Part 25: Rain Test GJB 5491.25-2005 Armored Vehicle Test Regulations Part 70: Rain Test GJB 59.70-2004 |
| Acceleration test | Military equipment laboratory environmental test methods - Acceleration test GJB150.1*-2009 7.2 Military equipment environmental test methods - Acceleration test GJB 150.15-1986 4 Environmental testing for electrical and electronic products - Part 2: Test methods - Test Ga and guidelines: Steady state acceleration GB/T 2423.15-2008 6 Coastal defense missile environmental specification - Acceleration test for on-board equipment QJ 1184.11-1987 4 |
| Temperature shock test | Military equipment laboratory environmental test methods Temperature shock test GJB 150.*-2009 7.2.2 7.2.3 Military equipment environmental test methods Temperature shock test GJB150.5-1986 4 Environmental testing for electrical and electronic products Part 2: Test methods Test N: Temperature change GB/T 2423.22-2012 7 8 |
| Damp heat test | Military Equipment Laboratory Environmental Test Methods Part 9: Damp Heat Test GJB 150.9A-2009 7.3 Military Equipment Environmental Test Methods Damp Heat Test GJB 150.9-1986 4.1 4.2 4.3 Ship Electronic Equipment Environmental Test Constant Damp Heat Test GJB 4.5-1983 4 Ship Electronic Equipment Environmental Test Alternating Damp Heat Test GJB 4.6-1983 4 Basic Environmental Test Procedures for Electrical and Electronic Products Test Ca: Constant Damp Heat Test Method GB/T 2423.3-2006 7 Basic Environmental Test Procedures for Electrical and Electronic Products Test Db: Alternating Damp Heat Test Method GB/T 2423.4-2008 7 Environmental Test Part 2: Test Methods Test Z/AD: Temperature/Humidity Combined Cycle Test GB/T 2423.34-2012 6 Environmental Specification for Coastal Defense Missiles - Damp Heat Test for Onboard Equipment QJ 1184.5-1987 4.14.2 4.3 General Specification for Military Communication Equipment GJB 367A-2001 4.7.29 4 .7.29 |
| Temperature humidity height test | Military equipment laboratory environmental test methods Part 2: Low pressure (altitude) test GJB 150.2A-2009 7.3.1 7.3.2 Military equipment environmental test methods Low pressure (altitude) test GJB 150.2-1986 4.1 4.2 Military equipment environmental test methods Temperature altitude test GJB 150.6-1986 4 Military equipment laboratory environmental test methods Part 24: Temperature humidity vibration altitude test GJB 150.24A-2009 7 Military equipment environmental test methods Temperature humidity altitude test GJB 150.19-1986 4 Basic environmental test regulations for electrical and electronic products Test Z AM: Low temperature/low pressure comprehensive test GB/T 2423.25-2008 8 Basic environmental testing procedures for electrical and electronic products Test Z/BM: High temperature/low pressure comprehensive test GB/T 2423.26-2008 8 |
| Reliability test | Reliability Identification and Acceptance Test GJB 899A-2009 5 Reliability Growth Test GJB 1407-1992 4 Reliability Identification and Acceptance Test GJB 899-1990 5 General Specification for Military Communication Equipment GJB 367A-2001 Appendix B 4.7.51 |
< br/> Electromagnetic compatibility testing
| Detection items | Detection standard | |
| CE101 25Hz~10kHz power line conduction emission | Electromagnetic emission and sensitivity requirements for military equipment and subsystems GJB151A-1997 5.3.1 Measurement of electromagnetic emission and sensitivity for military equipment and subsystems GJB152A-1997 method CE101 Electromagnetic emission and sensitivity requirements and measurements for equipment and subsystems GJB151B-2013 5.4 | |
| CE10210kHz~10MHz power line conduction emission | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.2 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CE102 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.5 | |
| Conductive emission of CE10610kHz~40GHz antenna terminals | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.3 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CE106 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.6 | |
| Conducted emission of peak signals on CE107 power lines | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.4 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CE107 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.7 | |
| CS10125Hz~50kHz power line conduction sensitivity | Electromagnetic emission and sensitivity requirements for military equipment and subsystems GJB151A-1997 5.3.5 Measurement of electromagnetic emission and sensitivity for military equipment and subsystems GJB152A-1997 method CS101 | |
| CS10125Hz~150kHz power line conduction sensitivity | Electromagnetic emission and sensitivity requirements and measurements for military equipment and subsystems GJB151B-2013 5.8 | |
| Electromagnetic emission and sensitivity requirements and measurements for military equipment and subsystems GJB151B-2013 5.9 | |
| CS106 power line spike signal transmission sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.9 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CS106 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.13 | |
| CS10950Hz~100kHz shell current conduction sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.10 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CS109 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.14 | |
| CS112 electrostatic discharge sensitivity | Electromagnetic emission and sensitivity requirements and measurements for military equipment and subsystems GJB151B-2013 5.15 | |
| CS1410kHz~400MHz cable bundle injection conductivity sensitivity | Electromagnetic emission and sensitivity requirements for military equipment and subsystems GJB151A-1997 5.3.11 Measurement of electromagnetic emission and sensitivity for military equipment and subsystems GJB152A-1997 method CS114 | |
| CS1144kHz~400MHz cable bundle injection conductivity sensitivity | Electromagnetic emission and sensitivity requirements and measurements for military equipment and subsystems GJB151B-2013 5.16 | |
| CS115 cable bundle injection pulse excitation conduction sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.12 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CS115 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.17 | |
| CS111610kHz~100MHz cable and power line damping sinusoidal transient conduction sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.13 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method CS116 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.18 | |
| RE101 25Hz~100kHz magnetic field radiation emission | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.14 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method RE101 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.19 | |
| RE10210kHz~18GHz electric field radiation emission | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.15 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method RE102 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.20 | |
| RE103 Harmonic and spurious radiation emission from 10kHz to 40GHz | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.16 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method RE103 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.21 | |
| RS10125Hz~100kHz magnetic field radiation sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.17 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method RS101 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.22 | |
| RS10310kHz~40GHz electric field radiation sensitivity | Military equipment and subsystems electromagnetic emission and sensitivity requirements GJB151A-1997 5.3.18 Military equipment and subsystems electromagnetic emission and sensitivity measurement GJB152A-1997 method RS103 Military equipment and subsystems electromagnetic emission and sensitivity requirements and measurement GJB151B-2013 5.23 | |
| CE0310kHz~30MHz power line conduction emission | Ship Electromagnetic Compatibility Requirements HJB34A-2007 10.2 | |
| CS0125Hz~50kHz power and ground wire conductivity sensitivity | Ship Electromagnetic Compatibility Requirements HJB34A-2007 10.4 | |
| CS06 power line spike signal conduction sensitivity | Ship Electromagnetic Compatibility Requirements HJB34A-2007 10.8 | |
| RE0125Hz~100kHz magnetic field radiation emission | Ship Electromagnetic Compatibility Requirements HJB34A-2007 10.13 | |
| RS01 DC and 25Hz~100kHz AC magnetic field radiation sensitivity | Ship Electromagnetic Compatibility Requirements HJB34A-2007 10.16 | |
| withstand peak voltage | Aircraft power supply characteristics and requirements for electrical equipment GJB 181-1986 2.4.4.1 | |
| Withstand voltage surge | Aircraft power supply characteristics and requirements for electrical equipment GJB 181-1986 2.4.4.2 | |
| Voltage spike | Aircraft power supply characteristics GJB 181A-2003 5.4.7 | |
| Power characteristics | Aircraft power supply characteristics GJB 181A-2003 5 Aircraft power supply characteristics GJB181B-2012 5 | |
| Surge voltage | Electromagnetic compatibility requirements for aerospace systems GJB 3590-1999 5.3.3.6 | |
| Electrostatic sensitivity | Electromagnetic compatibility requirements for aerospace systems GJB 3590-1999 5.4.7.2 | |
| Electrostatic discharge immunity | Electromagnetic compatibility testing and measurement techniques - Electrostatic discharge immunity test GB/T17626.2-2006 | |
| Shielding effectiveness | Measurement method for shielding effectiveness of electromagnetic shielding rooms GB/T 12190-2006 5 Measurement method for shielding effectiveness of small shielding bodies GJB 5185-2003 5.3 Requirements and testing methods for shielding effectiveness of military electronic equipment general chassis cabinets GJB 5240-2004 6 Measurement method for shielding effectiveness of missile shells GJB 5362-2005 5 5 | |
| Field strength | Electromagnetic radiation exposure limits and measurement methods GJB 5313-2004 4 Electromagnetic environment field measurement methods QJ2803-96 5.1, 5.2 | |
| Power density | Electromagnetic radiation exposure limits and measurement methods GJB 5313-2004 4 Electromagnetic environment field measurement methods QJ2803-96 5.1, 5.2 |
Recommended products
- 2024-04-12Steam accelerated aging test chamber
- 2024-03-05Hot oil impact test chamber
- 2024-03-05Comprehensive environmental test box for car lights
- 2024-02-22Mars Surface Integrated Environment Module
- 2024-02-22Lunar Surface Integrated Environment Module
- 2024-02-22Space Environment Test Module
- 2024-02-22Acidic Atmosphere Test System
- 2024-02-22Acid salt spray test system